Special Finishes
Sina Pearson Textiles fabrics can be specially treated for Nano-Tex® (and Dura-BlockTM), balanceTM BarrierTM, Teflon®, flammability, and acrylic backing for upholstery and wall covering application. The choice of finish for a particular fabric is the sole responsibility of the purchaser. Sina Pearson Textiles is not responsible for any changes that may occur in the finishing of the fabric.
Shrinkage
Fabrics may shrink during finishing processes. An additional 1 yard per roll should be ordered to assure the finished fabric will be the required length.
Ordering Special Finishes
Sina Pearson Textiles will ship approved SPT fabrics to a finisher selected by Sina Pearson Textiles at the risk of the customer. Before shipping, the customer will be billed by Sina Pearson Textiles for the fabric, cost of finshing, and freight to the finisher and final destination. Charges for the processing and handling are listed below. Please allow 2-3 weeks for processing.
| View Sina Pearson Finishes Chart (pdf) |
Nano-Tex® + Dura-Block®
Nano-Tex is a high performance specialty finish that can be applied to virtually any fabric. It creates a permanent soil and stain repellent finish that is easily cleaned and is breathable. The process also increases product strength and durability and offers mold/mildew protection. Once a fabric has been treated with Nano-Tex, Dura-Block, a moisture-proof backing can be applied for additional protection. Nano-Tex treated fabrics can be cleaned by following the appropriate instructions for the particular fiber type.
| View Sina Pearson Nano-Tex Approvals List (pdf) |
NANO-TEX PRICE LIST 2012
| FINISH | MIN YDGE REQ (PER COLORWAY) |
COST/YD | MIN CHARGE |
|
|
|||
| Nano-Tex | 5 yds. | $2.50 | $175.00 |
| Nano-Tex Bio AM | 5 yds. | $3.00 | $175.00 |
| Dura-Block added to SPT Nano-Texed fabrics | 5 yds. | $5.00 | $175.00 |
| Nano-Tex and Dura-Block | 5 yds. | $6.00 | $175.00 |
| Nano-Acrylic backing | 5 yds. | $3.00 | $225.00 |
* Note: Add 1 yard per roll for working loss or shrinkage during processing.
Defend WD2 With Sunbrella® Contract Fabrics
Sunbrella Contract fabrics can be treated with Defend WD2 moisture barrier to prevent liquid spills from penetrating the upholstered piece. Defend WD2 can be specified when ordering Sina Pearson Textiles Sunbrella Contract patterns. Allow two weeks for processing.
DEFEND WD2 PRICE LIST
| FINISH | MIN YDGE REQ | COST/YD | MIN CHARGE |
|
|
|||
| Defend WD2 | 10-25 yds. over 25 yds. |
$3.50 | $150.00 |
*Note: Minimum yardage required is 10 yards. Add one yard per roll for working loss during processing.
balanceTM Barrier with GreenShieldTM
balance Barrier is a moisture barrier that can be applied to fabrics already finished with GreenShield. It provides protection against liquids from penetrating the upholstered piece. Eco-friendly, antimicrobial and soft and breathable, balance Barrier can be specified while ordering the selected GreenShield-finished Sina Pearson fabric. Allow 2 weeks for processing.
BALANCE BARRIER PRICE LIST 2012
| FINISH | MIN YDGE REQ (PER COLORWAY) |
COST/YD | MIN CHARGE |
|
|
|||
| balance Barrier | 10-25 yds. over 25 yds. |
$3.50 | $150.00 |
*Note: Minimum yardage required is 10 yards. Add one yard per roll for working loss during processing.
Teflon®
All Sina Pearson Textiles fabrics can be treated with Teflon, a silicone stain repellent finish.
TEFLON PRICE LIST 2012
| FINISH | MIN YDGE REQ (PER COLORWAY) |
COST/YD | MIN CHARGE |
|
|
|||
| Teflon/Teflon Comparable | 5 yds. | $3.25 | $85.00 |
* Note: Add 1 yard per roll for working loss or shrinkage during processing.
Flame Retardant Finishes
All Sina Pearson Textiles fabrics are manufactured to comply with the California Upholstered Furniture Flammability Code Bulletin #117, Section E, Part 1, revised January 1980. Additional tests performed on individual fabrics are listed in the current price list under each item's name. Many of the fabrics can be durably flame retarded to meet other codes. When arranging for application of flame retardant finishes the customer must advise in writing:
- Specific city, state, or federal codes required of installation site
- Application of fabric (upholstery, wallcovering, drapery, etc.)
The finisher will issue a certificate to the customer verifying the specified flame retardant test results.
FLAME RETARDANT PRICE LIST 2012
| FINISH | MIN YDGE REQ (PER COLORWAY) |
COST/YD | MIN CHARGE |
|
|
|||
| Flameproof Treatment | 5 yds. | $4.25 | $125.00 |
* Note: Add 1 yard per roll for working loss or shrinkage during processing.
Additional charges may be incurred for certification testing.
Acrylic Latex Backing for Walls and Upholstery
All Sina Pearson Textiles fabrics can be treated with acrylic latex backing for use on walls or upholstery application. Sina Pearson Textiles is not responsible for any distortion of weave that may occur, nor for the suitability of backing selected for method of application. The specific use must be provided on the purchase order. Upholstery fabrics woven of 100% Avora® FR polyester should not be treated with acrylic latex backing unless FR qualities are not required in the installation, since such treatments may adversely affect their inherently flame retardant characteristics. Fabrics woven of 100% nylon are not suitable for vertical application.
ACRYLIC LATEX BACKING PRICE LIST 2012
| FINISH | MIN YDGE REQ (PER COLORWAY) |
COST/YD | MIN CHARGE |
|
|
|||
| Upholstery Backing | 5 yds. | $4.50 | $135.00 |
| Upholstery Backing (includes Teflon/Teflon Comparable) | 5 yds. | $7.50 | $185.00 |
| Wallcovering Backing (includes Teflon/Teflon Comparabale) | 5 yds. | $8.50 | $185.00 |
* Note: Add 1 yard per roll for working loss or shrinkage during processing.
150 Varick Street, New York, NY 10013